1 3

VXB

13x32x10mm Non-Standard Ball Bearing 13mm x 32mm x 10mm

13x32x10mm Non-Standard Ball Bearing 13mm x 32mm x 10mm

$32.39 USD
$29.99 USD $32.39 USD
Sale Sold out
Shipping calculated at checkout.
13mm x 32mm x 10mm Radial Deep Groove Bearing
āœ”ļø One bearing double metal shields pre-lubricated with grease

This single 13x32x10mm deep groove ball bearing supports rotating shafts in motors wheels and other machinery where low friction and dust protection matter.

āœ… Dimensions 13mm ID by 32mm OD by 10mm wide
āœ… Dynamic load rating 6800 N static load rating 3050 N
āœ… Double metal shields ZZ for dust protection
āœ… Pre-lubricated with grease limiting speed 22000 RPM

šŸ’” What are deep groove ball bearings commonly used for? These handy bearings keep shafts spinning smoothly under radial and light axial loads. - They work well in electric motors pumps and wheels that run at moderate speeds. - The sealed design blocks dust and keeps grease inside for longer service life. - One bearing arrives ready to install without extra lubrication steps needed.

āœļø

13x32x10mm Non Standard Ball Bearing

13mm x 32mm x 10mm
One Bearing



13x32x10mm Non Standard Ball Bearing 13mm x 32mm x 10mm, inner diameter is 13mm, the outer diameter is 32mm and the width is 10mm, it can spin up to 10000 rpm, 13x32x10mm bearing has 2 Metal Shields to protect the bearing from dust or any possible contamination, 13x32x10mm bearings are pre-lubricated with grease.

  • Dimensions: 13*32*10 mm/Metric
  • Dynamic load rating Cr: 6,800 N
  • Static load rating Cor: 3,050 N
  • Limiting Speed:
    • Grease Lubrication: 22,000 RPM
  • ID (inner diameter)/Bore=13mm
  • OD (outer diameter)=32mm
  • Width/Height/thickness=m10m
  • Radial Deep Groove Ball Bearings
  • Size: 13mm x 32mm x 10mm
  • Deep groove ball bearings
  • Shield Double Metal Shields for dust protection (ZZ)
  • Lubrication: Pre-lubricated with grease
  • Quantity: 1 Bearing
View full details